LED warning light bar 310x159x75mm R65 R10 with the code BLK0010 features: z, 1 warning flash. It has 72 LEDs. BLK0010 has a power consumption of 42 W. BLK0010 is a certified product. Compliant with standards such as ECE, ECE. Additionally, it is made of materials: Lens: PC, Housing: ABS. LED warning light bar 310x159x75mm R65 R10 is mounted on a magnet. The voltage is 12 V/24 V. The product is packaged in the following configuration dimensions 330x170x100 mm R10, weight: R65, 12 in a pack, 750 g per piece/carton.
USER WARNINGS:
• Do not direct the light column towards the eyes - this may cause injury or even loss of vision.
• Installation only in specialized facilities or professional services.
• Use in well-ventilated areas.
• Use according to its intended purpose.
INSTALLATION INSTRUCTIONS · Install only in specialized workshops · The connection of the lamp to the vehicle's installation must be insulated with heat-shrink tubing or possibly insulating tape to prevent water and moisture from entering the copper lamp wire, which may damage the electrical system. In the case of lamps with a plug, securely insert the plug. Do not cut off the tinned ends of the wires. · Lamps must be installed only in accordance with the UN ECE regulations - Mount the lamp only to a flat, metal, dry, cleaned, and degreased roof surface. The maximum vehicle speed with the warning lamp attached using a magnet to the roof surface is 50km/h. Exercise extreme caution in windy conditions. Do not disassemble the lamp, as this will result in loss of its waterproofing. www.myKAMAR.com
Security policy
Delivery policy
Return policy
