OSRAM BATTERYcharge 1002 – smart charging and battery maintenance
OSRAM BATTERYcharge 1002 is a compact smart battery charger with a charging rate of up to 2 A for 6 V and 12 V systems. OSRAM recommends the model primarily for motorcycles and smaller vehicles, making it a practical option for maintaining smaller batteries during periods when a vehicle is used less frequently.
Key benefits
- Up to 2 A charging current for smaller vehicle batteries.
- 6 V and 12 V compatibility for a wide range of motorcycle and small-vehicle applications.
- 4–40 Ah charging range specified by the manufacturer.
- Maintenance for batteries up to 120 Ah with automatic maintenance mode after charging.
- 9-stage charging for Lead, AGM and EFB batteries plus a dedicated 7-stage lithium cycle.
- IP65 rating and compact 126 × 84 × 52 mm housing.
Automatic multi-stage charging
The charger manages the charging process automatically. Lead-acid, AGM and EFB batteries use a 9-stage process, while lithium batteries have a separate 7-stage cycle. Once charging is complete, BATTERYcharge 1002 automatically changes to maintenance mode.
The current model-specific datasheet describes lithium compatibility in general terms and does not identify a specific lithium chemistry. Before charging a lithium battery, check the battery specification and its manufacturer's charging requirements.
Battery capacity
OSRAM specifies a minimum battery capacity of 4 Ah and a maximum capacity of 40 Ah for charging. The stated maximum for maintenance is 120 Ah. These values refer to different operating purposes, so the 120 Ah figure should not be interpreted as the charger's stated maximum capacity for fully charging a battery.
Connections and cable length
Battery connection is available via crocodile clamps or O-ring terminals. Both the power cable and clamp cable are specified at 1.8 m, providing useful flexibility when positioning the charger around a motorcycle or vehicle.
Compact and protected construction
BATTERYcharge 1002 carries an IP65 protection rating and measures 126 × 84 × 52 mm. OSRAM also states that a storage bag is supplied with the charger.
Recommended applications
- motorcycles,
- smaller 6 V and 12 V vehicles,
- Lead, AGM and EFB batteries,
- compatible lithium batteries,
- vehicles equipped with Start/Stop systems.
Technical data
| Parameter | Value |
|---|
| Brand | OSRAM |
| Model | BATTERYcharge 1002 |
| Manufacturer code / MPN | OEBCS1002 |
| Vehicle system | 6/12 V |
| Maximum charging current | 2 A |
| Battery capacity for charging | 4–40 Ah |
| Maximum maintenance capacity | 120 Ah |
| Lead / AGM / EFB cycle | 9 stages |
| Lithium cycle | 7 stages |
| Start/Stop compatibility | Yes |
| Protection rating | IP65 |
| Dimensions | 126 × 84 × 52 mm |
| Power cable length | 1.8 m |
| Clamp cable length | 1.8 m |
| Battery connection | O-rings / crocodile clamps |
| EAN | 4062172426824 |
| Manufacturer guarantee | 2 years |
Frequently asked questions
Can BATTERYcharge 1002 charge a 60 Ah battery?
OSRAM specifies a maximum of 40 Ah for charging. The figure of up to 120 Ah applies to battery maintenance.
Does it support 24 V batteries?
No. BATTERYcharge 1002 is designed for 6 V and 12 V systems.
Can it charge lithium batteries?
OSRAM specifies a dedicated 7-stage lithium cycle. The model-specific datasheet does not identify a particular lithium chemistry.
Is it Start/Stop compatible?
Yes. OSRAM lists BATTERYcharge 1002 as compatible with Start/Stop vehicles.
Security policy
Delivery policy
Return policy
