Escape Alu-One – Quick-Deploy 2-Person Rooftop Tent in an Aluminum Shell Grey

Escape Alu-One – Quick-Deploy 2-Person Rooftop Tent in an Aluminum Shell

All Escape rooftop tents are crafted with precision and attention to detail, and come with a 24-month warranty.

⇒ Key Features and Benefits:

• Floor made of aluminum, filled with insulating foam
• Soft high-resilience foam mattress, 4 cm thick
• Removable mattress cover for easy washing
• Two small storage pockets on the inner walls, ceiling organizer with 6 compartments
• All doors and windows equipped with zippered mosquito nets and shutters
• With all shutters closed, the interior stays dark, preventing early wake-ups at dawn
• Aerodynamic, sealed aluminum outer shell that minimizes wind resistance while driving
• Includes LED lamp powered by battery (USB or solar panel charging)
• Rapid setup – tent is ready to use in moments

⇒ Materials:

• Tent fabric made from top-quality breathable, impregnated cotton (280 g/m²), reinforced with polyester “ripstop” mesh, water resistance 2000 mm
• Tent and flysheet resistant to UV rays and mold
• Wall and flysheet seams are taped
• Shell made of aluminum

⇒ Set Includes:

• Tent
• Aluminum mounting rails, complete set of bolts and fasteners
• 2.3 m telescopic ladder
• Two hanging shoe bags (one on each side of the ladder)
• LED lamp powered by battery (USB or solar panel charging)

⇒ Installation:

The tent can be installed on any vehicle equipped with two crossbars or a roof rack platform.
If the rack has a frame higher than the rack base, an extra crossbar may be needed at the frame’s height to prevent the tent from sitting inside the rack.
The tent mounts are adjustable along the longer side of the tent, allowing them to fit different crossbar spacings.
Attachment to the crossbars is done with 8 bolts and 4 flat brackets, forming 4 clamps – two per crossbar.
Minimum crossbar spacing is half the tent length – for the Alu-One model, that’s 100 cm.

⇒ Setup Steps (quick and effortless):

1. Unclip the two latches on the tent edge
2. Push the tent lid upward – the gas struts will do the rest
3. Attach the two tension rods for the awning above the entrance
4. Rest the ladder against the tent edge

⇒ Technical Specifications:

• Dimensions when open: 205 × 130 × 150 cm (highest point)
• Dimensions when closed: 205 × 130 × 20 cm
• Sleeping area: 200 × 120 cm
• Weight: 75 kg
• Capacity: 2 people